Where to begin again...

Posts have been few and far between due to other priorities (knitting, anyone?), life events, and well, because we've been too busy doing things in our home to record them. But we have some big things on the horizon so I might as well catch up with the smaller things over the next few months and try to build some momentum so...hi. We're back.

It's growing season, so as any regular reader will know, it's time for a lawn and garden catch-up. But let's talk about some of the hardware on the way to the outside first. Last fall, we updated some fixtures that put the finishing touches on our siding refresh from spring. Our outdoor lights in the front seemed like they were probably from a discount value pack several decades ago. It was definitely time to swap them out for some curb appeal. The post itself also needed some refresh--it was showing signs of rusting at the top and bottom. I've spray painted it one already, probably almost 10 years ago now (but somehow I couldn't find a post for it when I looked), so that held up pretty well:

After a quick sand-down to remove some of the rust and a wipe with a damp clothed, I went to work applying a few thin coats:

More dramatically, D tackled the electrical work, replacing the topper with one made of clear glass and an Edison bulb (the kind with the exposed filament, a style we've turned to multiple times before, and which you will see again in a future post). This is actually the second post topper, as we originally bought one that was much too high and out of proportion with the rest of the lamp post.

Of course the rest had to be replaced to match! The lamp right next to the door came next:

As always, a mass of old, deteriorating wires greeted us. Nothing too surprising though, so we just proceeded with the new fixture.

Tah-dah! But wait, there's more!

We forgot to get a "before" picture for the light over the garage, but it was similar to the other two, with the plastic shade and black construction. The wires were less deteriorated than next to the front door, but just barely.

Now we have three lovely, matching exterior lights (though the lack of a more sealed-off receptacle does mean things get a little dusty inside).

Coincidentally with all that, our front door hardware abruptly failed one day, almost locking us out. It wasn't the Schlage auto-lock that died (which you might expect, given that it has a battery and small computer) but the mechanism in the doorknob itself that pulls back the latch bolt. It failed pretty spectacularly--D had to uninstall it immediately just so we could get in and out, so it became important that we replace it immediately (the dead bolt still worked independently, fortunately).

Once we went looking, we wondered why we hadn't replaced it sooner. All our front door hardware is brushed nickel, including the storm door handle and our smart lock, and yet we had inherited this oil-rubbed bronze pull (oddly paired with a nickel doorknob on the inside). Why had we kept it so long? I guess it simply wasn't something we had thought of. But the new fixture (on the right) is so much prettier.

Even better, we replaced the slippery inside knob with a lever. This works better for so many reasons! Easier for Grandma (arthritis), me (hand lotion and mittens/gloves), and the kids (tiny hands). Yet another thing we never really considered replacing and yet made a big difference. 

It took one extra try to get right--we were so un-used to levers that we selected the wrong one at first, and had to reinstall the second one that came in the box when we realized which way the lever is supposed to swoop:

And because this is the house of a knitter, it seemed like a good time to upgrade our door wreath too (partly because the UV effects on the old one made all the plastic so brittle it left piles on our floor every time we opened the door):

The lights and handle weren't cheap, but they weren't expensive either. One of those things that can make a big impact in tiny details that seem so obvious afterwards.

Next time, stay tuned for a big yard update as I try to get back in the swing of things.